Adding Rf Actuators To The Floorplan; Rf Control Actuators; Starting Up Scenes - iNels Smart RF box eLAN-RF-003 Installation Manual

The number of floorplans is limited by the memory size of the eLAN-RF-003.
Find out the memory status in the top of the configuration panel.

The panel Action - displays options for control of the currently highlighted RF actuator on the
floorplan.

Adding RF actuators to the floorplan

Click on the room in the Rooms panel into which you want to add the required RF actuator, and a
floorplan will then appear on the desktop (not necessary however - a white space may remain as the
floorplan), double-click anywhere on the desktop, and the addition of RF actors will be activated by a
red boundary, and the Devices panel will open. Then double-click on individual RF actuators to add
the RF actuators that you require on the floorplan. You have the option of removing the actuator by
right-clicking the mouse. If you do not use any of your added floorplans, you cannot move the icons; if
you have an assigned floorplan in the room, you can move the icons anywhere using the mouse and
distribute them on the floorplan. Once you add everything, the same as at the start, double-click
anywhere on the desktop (floorplan) to save all you've done.

RF control actuators

And now after clicking on one of the icons, you can control the RF actuators. You can do this either by
double-clicking directly on them, or after a single click on them the offer Action appears in the lower
right corner, in which you double-click to start the required action of the given RF actuator.
Between the individual commands must be an interval of at least 1s.

Starting up scenes

Startup is performed in a similar manner, where after clicking on the panel Scenes, you select the
required scene and then double click on it.
Manual / rev.5
eLAN-RF-003
13 of 13
Page