iNels Smart RF box eLAN-RF-003 Installation Manual page 12


The panel Devices is used for adding RF actuators to the eLAN-RF-003.
Button (+) - add a new RF element:
1. Product Type – select RF element
2. Address – enter the address of the RF element that is listed right on the box of the added
EF element (six-character code).
3. Window ID* - name of element (not required).
4. Label - any naming of the element, e.g. "Kitchen light".
5. Type - select the type of icon (e.g. light), which will be displayed on the floorplan.
Create you will store the RF actuator in the eLAN-RF-003.
Button (–) - deleting the selected element.
Button (X) - remove all elements

Panel Floorplans here you can add floorplans (images, layouts....).
Button (+) - add a new floorplan:
1. Select the required image for the floorplan (stored in your PC).
2. ID – enter the name of the floorplan. Confirm by pressing OK.
Manual / rev.5
eLAN-RF-003
12 of 13
Page