eLAN-RF-003 Introduction ............................. 3 Installing the eLAN-RF-003, IP address .................... 4 Logging in to the web interface eLAN-RF-003 ................. 4 Settings ............................5 Configuration panel ..........................6 Description of functions ........................7 Adding RF actuators to the floorplan ....................13 RF control actuators ..........................
(you can gradually expand installation from 1 unit iNELS RF Control). • Thanks to bi-directional communication, it visualizes the current status of individual units. • The smart RF box eLAN-RF-003 is connected by network cable LAN to the home network (router) and communicates with your smart phone.
for mobile telephones with IOS: download the current version under the name iHC-MIRF in the app store. https://itunes.apple.com/cz/app/inels-home-control-rf-for/id704493937?mt=8 In the installed application, in the Settings menu, select eLAN Settings. Press the icon - search. Discovered eLAN-RF-003 units appear that are found in your network to which you are currently connected by phone (home network) as well as their IP addresses.
eLAN-RF-003 It is possible to log into the eLAN-RF-003 web interface either as: administrator (admin) with full access to controls and settings user (user) has the option of controlling the device Both users log into the same dialog field (Login, Password), but each uses his/her own name and password.
eLAN-RF-003 Description of functions By pressing the button Accounts, you will display a window for changing login data. By pressing Log out, you will log out of the web interface eLAN-RF-003. By pressing the button Save settings, you can save the current settings of your eLAN-RF- 003 including network settings.
Page 8
The button Update firmware is used to update the firmware in your eLAN-RF-003. When updating the eLAN-RF-003, proceed according to the following instructions: 1. Download the latest firmware version from the website http://www.elkoep.com/products/inels-rf- control-wireless-control/system-units/smart-rf-box-elan-rf-003-8488/ 2. Click on the button Update firmware, select the downloaded file (the update file must always include the extension *.bin), and click on it.
Page 9
eLAN-RF-003 Use: an eLAN-RF-003 device configured for a repeater can only be connected to the supply voltage, and it will then function just the same as the RFRP-20. This means if it receives a command from the RF controller or RF detector, it resends it to a designated RF element and vice-versa. ...
Page 10
eLAN-RF-003 List of addresses - the sames as with the Repeater function. The same addresses must be set for both eLANs. After setting the function Router, eLAN restarts. Button Date & Time Here the IP address of the NTP server is set by default, which determines for the eLAN the precise time via the Internet.
Page 11
eLAN-RF-003 Panel Scenes – Here any scenes are created based on user requirements. It is possible to create scenes only after you add rooms and actuators. Button (+) - add a new scene: 1. ID* - name of room (not required). 2.
Page 12
eLAN-RF-003 The panel Devices is used for adding RF actuators to the eLAN-RF-003. Button (+) - add a new RF element: 1. Product Type – select RF element 2. Address – enter the address of the RF element that is listed right on the box of the added EF element (six-character code).
eLAN-RF-003 The number of floorplans is limited by the memory size of the eLAN-RF-003. Find out the memory status in the top of the configuration panel. The panel Action - displays options for control of the currently highlighted RF actuator on the floorplan.