Description of functions
By pressing the button Accounts, you will display a window for changing login data.
By pressing Log out, you will log out of the web interface eLAN-RF-003.
By pressing the button Save settings, you can save the current settings of your eLAN-RF-
003 including network settings.
By pressing the button Load settings, you can restore your stored settings, which you have
already stored in your PC (the file has the extension .bin).
The button IP Settings is to configure network settings that you can change any time based
on your network.
Note: If you change the IP address (setup a static IP address), to log into the eLAN-RF-003 you must
use the new IP address. If the new IP address that you entered is not in the same subnetwork, the
connection will not work if settings are not changed in the connected device (PC, iMM Client) to the
same subnetwork.
Manual / rev.5
eLAN-RF-003
7 of 13
Page