American Dynamics Intellex DV8000 Installation And Operating Instructions Manual page 55

®
Intellex Digital Video Management System Installation and Operating Instructions
Changing a Segment
Schedule Setup
NOTE: To change a start time of 00:00 or an end time of 24:00,
define a new segment which starts at 00:00 or ends at
24:00, respectively (see
1. Select the appropriate screen: Weekday, Weekend or Holiday.
2. Move the mouse pointer over the start or end time for the
segment to change. The mouse pointer changes to
3. Click and hold the mouse button.
4. Drag the mouse pointer to the right or left. A box displays the
segment's new start and end times (24-hour format).
5. When the desired times appear, release the mouse button.
When changing the times of adjacent segments, the unit
chooses the segment that you are enlarging. Then it displays
the times for that segment.
For example, when enlarging an alarmed segment (00:00 to
07:00) that is next to an active segment (07:00 to 18:00), click
on the boundary between the segments (07:00) and drag
right. The unit displays the alarmed segment's new times, as
long as the boundary stays to the right of 07:00. If the
boundary is dragged left past 07:00, the unit chooses the
active segment and displays the new times for the active
segment.
6. After changing an active or alarmed segment, configure its
live filter and other settings (see
Segment and Configuring an Alarmed
NOTE: You must have purchased the Smart Pack option to use
the Live Filter Configuration
Defining a New Segment).
Configuring an Active
Segment).
functions.
55
.
MORE>>>