®
Intellex
Digital Video Management System Installation and Operating Instructions
ALARM
CONNECTORS
Alarm Connectors
The alarm connectors accept up to 16 alarm inputs and 16 alarm
outputs. Use the information in this appendix to install your
alarm devices to the back of the unit.
NOTE: The polarity of all alarm inputs is programmable (see
Alarm
Setup). However, the polarity of all alarm outputs is
active-high. Also, the alarm outputs are initialized to
inactive low on power-up.
Figure 5 — Alarm Connectors on Rear Panel
Attach the alarm inputs, outputs and grounds to the connectors,
according to the pin assignments (refer to on the next page).
145
MORE>>>