Table Of Contents - NETGEAR MS510TXM Hardware Installation Manual

Contents
Chapter 1 Introduction
Overview................................................................................................6
Features.................................................................................................6
Safety instructions and warnings........................................................8
Chapter 2 Hardware Overview
Hardware overview of model MS510TXM......................................12
Front panel model MS510TXM....................................................12
LEDs model MS510TXM...............................................................13
Back panel model MS510TXM.....................................................13
Hardware overview of model MS510TXUP.....................................14
Front panel model MS510TXUP..................................................14
LEDs model MS510TXUP..............................................................15
Back panel model MS510TXUP...................................................16
Switch hardware interfaces...............................................................17
RJ-45 ports for 100/1000M and 2.5G/5G/10G BASE-T Ethernet
connectivity.....................................................................................17
Transceiver modules and cables for SFP+ fiber ports..............18
Multi-function Reset button..........................................................18
PoE port capacities and budget for model MS510TXUP..........19
Chapter 3 Applications
Multispeed PoE++ and PoE+ access points and cameras............22
Multispeed backbone switching.......................................................23
10G network storage and redundancy............................................24
Chapter 4 Installation
Step 1: Prepare the site......................................................................26
Step 2: Protect against electrostatic discharge..............................26
Step 3: Unpack the switch.................................................................27
Step 4: Install the switch....................................................................28
Install the switch in a rack..............................................................28
Install the switch on a flat surface.................................................29
Optional Step 5: Install an SFP transceiver module or cable........29
Step 6: Connect devices to the switch.............................................30
Step 7: Check the installation...........................................................31
3