Understanding Sequence Programming - American Dynamics ADTT16 Operator's Manual

seconds long. The number of commands remaining for this camera
appears on the LCD as you program the Pattern.
9. When you complete programming the Pattern, press the Next button.
The following message appears on the LCD:
The T
In the List of Patterns (in Appendix A of this manual), make a record of the
Pattern you just defined, including a brief description of the Pattern.
Tip: A shortcut method is available for defining Patterns. Press Menu,
Pattern, and the Pattern number. Move the camera in the desired pattern,
then press Next when finished.

Understanding Sequence Programming

You can define a Sequence that incorporates up to 16 events. An event is a
Quick View or Pattern that you have already defined; an event can also be a
fixed shot. The events that you include in the Sequence can be defined for
any camera. For each event, you designate a duration time, which indicates
how long that event will remain on the monitor before the Sequence switches
to the next event.
Before you begin defining the Sequence, you should have a clear
understanding what you want to include in the Sequence. Refer to the lists
that you compiled (in Appendix A) of the available Quick Views and
Patterns. Make sure you can answer the following questions:
Which Quick Views, Patterns, and fixed shots will you include in the
Sequence?
Defining Automatic System Functions
T automatically returns to the camera control mode.
OUCH RACKER
Cam 3
Pattern Saved
4-7