How The System Resolves Conflicts In Camera Control; Selecting A Camera - American Dynamics ADTT16 Operator's Manual

How the System Resolves Conflicts in Camera Control

If your system configuration includes two T
T
OUCH
when the system is in the camera control mode. Whichever camera the Main
operator has selected will be "locked" and the Call operator will not be able
to control it. The Call operator can select that camera and display its video
on the Call monitor; however, he or she will not be able to control that
camera at all.
If the Call operator attempts to control a camera that is currently selected by
the Main operator, the message, "Camera In Use" appears on the Call
T
OUCH
use by the Call operator, the message, "Camera Override" appears on
the Call T
The Main operator maintains control over a camera until one of the
following things happens:
The Main operator selects a new camera
The Main operator enters the menu/programming mode
The Main operator initiates the Sequence
An alarm comes into the system
The selected camera remains idle for 3 minutes
Once the Main operator relinquishes control of a camera for any of the
reasons mentioned above, the message, "Camera Free" appears on the
Call T

Selecting a Camera

Each camera has a unique number associated with it. To select a camera, use
the number buttons to enter the camera number, and then press Camera.
The video from that camera appears in the full-screen mode on the monitor,
and the associated camera number appears in the bottom left corner of that
monitor.
3-2
T will always have priority over the Call T
RACKER
T . If the Main operator selects a camera that is currently in
RACKER
T . The Main operator secures control of the camera.
OUCH RACKER
T (if the Call operator has that camera selected).
OUCH RACKER
T s, the Main
OUCH RACKER
OUCH
Operator's Manual
T
RACKER