Rear Panel - Roland OCTAPAD SPD-20 PRO Owner's Manual

Rear Panel

MIX IN jack
Connect another electronic
musical instrument, external
audio device (portable audio
player, computer, CD player,
etc.). The sound that is input
to this jack is output from the
OUTPUT jacks and the PHONES
jack.
[VOLUME] knob
Adjusts the volume that is
output from the OUTPUT
(L/R) jacks and the PHONES
jack.
PHONES jack
Connect your
headphones. Even
when using your
headphones, sound
is still output from the OUTPUT
jacks.
OUTPUT jacks
For connection to your
amplification or recording
system.
If making a MONO connection,
use the L/MONO jack.
EXTERNAL TRIGGER INPUT1–4 jacks/HH CTRL jack
Connect pads or pedals to
the 1–4 external trigger
input jacks. To make this
connection, use the cable
that is included with each
pad. All pads and pedals are
sold separately.
To the HH CTRL jack you can connect a hi-hat control pedal
that is compatible with the FD-8, FD-9, VH-10, or VH-11.
p. 28
USB MEMORY port
Connect a USB flash drive (sold separately).
This lets you back up the OCTAPAD's
settings to a USB flash drive.
MIDI port
Connect MIDI devices.
DC IN jack
Connect the included AC
adaptor here.
* To prevent malfunction and equipment failure, always turn down the volume,
and turn off all the units before making any connections.
p. 22
FOOT SW jack
You can connect
a footswitch (sold
separately: BOSS FS-
5U, FS-6) and use it
to control a variety of
things.
Use the cord hook to secure the cord
p. 26
of the AC adaptor as shown in the
illustration.
The cord of the
supplied AC Adaptor
Panel Description
p. 25
[POWER] switch
p. 11
Turns the power on/off.
Cord Hook
9