Adjusting The Signal Level Of The Output Jacks And Phones Jack; Setting The Auto Off Function; Viewing The Version - Roland OCTAPAD SPD-20 PRO Owner's Manual

Adjusting the Signal Level of the OUTPUT Jacks
and PHONES Jack
1. Press the [SYSTEM] button.
2. Use the [K][J] buttons to select "SOUND/CTRL," and
then press the [ENTER] button.
3. Use the [K][J] buttons to select "OutGain."
4. Use the [–][+] buttons to select the value.
* If you raise "OutGain" excessively, the sound might distort.

Setting the AUTO OFF Function

The power to this unit will be turned off automatically after a
predetermined amount of time has passed since it was last used
for playing music, or its buttons or controls were operated (Auto
Off function). If you do not want the power to be turned off
automatically, disengage the Auto Off function.
To restore power, turn the power on again (p. 11).
1. Press the [SYSTEM] button.
2. Use the cursor buttons to select "OPTION," and then
press the [ENTER] button.
3. Use the [K][J] buttons to select "AutoOff."
4. Use the [–][+] buttons to set the auto off function.
Value Explanation
OFF The power does not turn off automatically.
When four hours have elapsed without any pad
4 HOURS being struck or any operation being performed, the
unit will turn off automatically.
If you specify 4 HOURS, the message "Turn Off If Not Used for 4
Hours. " appears; press [ENTER].

Viewing the Version

Here's how to view the program version.
1. Press the [SYSTEM] button.
2. Use the [K][J] buttons to select "VERSION," and
then press the [ENTER] button.
Other Functions
31