Buttons - Siemens iQ500 User Manual And Installation Instructions

Buttons

Buttons
Below is an overview of the buttons and their setting options.
Buttons
The selection of programme settings depends on the selected programme. You
can see the selection options for each programme in the overview for
→ "Programmes", Page 24.
Button
Start/Reload
vario Speed
Ready In
Temp.°C
Spin Speed
⁠ 3 sec.
Spin Speed
Prewash
Less Ironing
Selection
¡ Start
¡ Cancel
¡ Pause
¡ Activate
¡ Deactivate
1–24 hours
– 90 °C
– –– - 1400
¡ Activate
¡ Deactivate
Basic settings
¡ Activate
¡ Deactivate
¡ Activate
¡ Deactivate
Description
Start, cancel or pause the programme.
Activate or deactivate a short washing pro-
gramme.
Note: Energy consumption increases.
The washing result is not affected by this.
Set the programme end.
The programme duration is already included in
the set number of hours.
Once the programme has started, the pro-
gramme duration is displayed.
Adjust the temperature in °C.
Adjust the spin speed or activate – –– (Rinse
Hold).
If – –– is selected, the water is not drained at the
end of the washing cycle and the spin cycle is de-
activated. The laundry remains in the water used
for rinsing.
Activate or deactivate the childproof lock.
Disable the control panel to prevent unwanted or
accidental operation.
If the childproof lock is activated and the appli-
ance has been switched off, the childproof lock
remains activated.
→ "Childproof lock", Page 38
Change the basic settings for the appliance.
Activate or deactivate prewash, e.g. for washing
heavily soiled laundry.
Activate or deactivate the reduced creasing pro-
gramme.
In order to reduce creasing in the laundry, the
spin cycle and the spin speed are adapted.
The laundry is damp enough after washing that it
needs to be hung out on a washing line.
Buttons en
23