Energy Saving Mode; Installation And Connection; Unpacking The Appliance - Siemens iQ500 User Manual And Installation Instructions

Energy saving mode

If you do not use the appliance for an
extended period, it automatically
switches to energy-saving mode. All
displays go out and Start/Reload
flashes.
Energy-saving mode ends when you
use the appliance again, e.g. if you
open or close the door.

Installation and connection

Installation and connec-
tion
Installation and connection

Unpacking the appliance

Note: Please read the information in
the "Safety" → Page 4 and "Prevent-
ing material damage" → Page 11 sec-
tions to ensure that you use the appli-
ance safely.
Installation and connection en
ATTENTION!
Objects remaining in the drum that
are not designed for operation with
the appliance may cause material
damage and damage to the appli-
ance.
Remove these objects, along with
▶
all supplied accessories, from the
drum before starting the appliance.
Remove any packaging and pro-
1.
tective covers completely from the
appliance.
For the environmentally friendly
disposal of the packaging materi-
als, observe the information on the
topic of
→ "Disposing of packaging",
Page 12.
Check the appliance for visible
2.
damage.
Open the door.
3.
→ "Basic operation", Page 34
Remove the accessory from the
4.
drum.
Close the door.
5.
13