Aligning The Appliance; Connecting The Appliance To The Electricity Supply - Siemens iQ500 User Manual And Installation Instructions

en Installation and connection

Aligning the appliance

In order to reduce noise and vibra-
tion and to prevent the appliance
from moving, align the appliance cor-
rectly.
Note: Please read the information in
the "Safety" → Page 4 and "Prevent-
ing material damage" → Page 11 sec-
tions to ensure that you use the appli-
ance safely.
Loosen the lock nuts using a WAF
1.
17 wrench by turning it in a clock-
wise direction.
To align the appliance, turn the ap-
2.
pliance feet. Check that the appli-
ance is level using a spirit level.
All appliance feet must stand firmly
on the ground.
18
Screw the lock nuts tightly against
3.
the housing using a WAF 17
wrench.
In doing so, hold the foot tight and
do not adjust its height.
Connecting the appliance to
the electricity supply
Note: Please read the information in
the "Safety" → Page 4 and "Prevent-
ing material damage" → Page 11 sec-
tions to ensure that you use the appli-
ance safely.
Insert the mains plug of the appli-
1.
ance's power cable in a socket
nearby.
The connection details of the appli-
ance can be found under "Tech-
nical data" → Page 58.
Check the mains plug is inserted
2.
properly.