Specifications - Makita DPB180 Instruction Manual

ENGLISH (Original instructions)
1-1. Battery cartridge
1-2. Button
1-3. Red indicator
2-1. Star marking
3-1. Lock-off button
3-2. Switch trigger
4-1. Speed adjusting dial
5-1. Lamp
6-1. Tighten
6-2. Loosen

SPECIFICATIONS

Max. cutting capacity
Blade size
Overall dimensions (L x W x H)
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for cutting in wood, plastic and
ferrous materials.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode : cutting metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Explanation of general view
6-3. Protrusion
6-4. Lever
7-1. Blade
7-2. Bearing
7-3. Upper holder
7-4. Lower holder
8-1. Upper holder
8-2. Lower holder
8-3. Wheel
8-4. Press
Model
Round workpiece
Rectangular workpiece
Blade speed
Length
Width
Thickness
Net weight
Rated voltage
) : 81 dB (A)
pA
) : 92 dB (A)
WA
2
) : 2.5 m/s or less
h,CM
2
ENE009-1
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
ENG905-1
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
ENG900-1
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
4
9-1. Screw
9-2. Stopper plate
9-3. Blade
13-1. Cutting wax
14-1. Wheel
14-2. Tire
14-3. Lip
15-1. Limit mark
16-1. Screwdriver
16-2. Brush holder cap
DPB180
120 mm dia.
120 mm x 120 mm
1.4 - 2.7 m/s
1,140 mm
13 mm
0.5 mm
523 mm x 231 mm x 313 mm
6.5 kg
D.C. 18 V
ENG901-1