Advertisement
Available languages
Available languages
Operation
Connect the consumer load to the mains socket (F).
Please consult the section "Technical Information" for the permissible maxi-
mum power of the consumer load.
By using the respective "ON" or "OFF" buttons of the switching channel at the hand-
held radio transmitter, the radio-controlled switch socket is turned on/off again with
the same set switching channel (control-LED (E) lights up or turns off).
Maintenance and Care
The product does not require any maintenance and should never be opened or dis-
sembled for any reason.
Remove connected consumer loads from the radio-controlled switch socket and re-
move it from the mains socket, before cleaning the product.
Only clean the product with a soft, clean, dry cloth. Never use aggressive cleansing
agents or chemical solutions, since they might damage the housing or impair the func-
tion of the device.
Handling
• The product is only to be used in closed, dry indoor locations. The product
must not get damp or wet.
• Avoid the following unfavourable environmental conditions at the installa-
tion location and during transportation:
- Excessive humidity or dampness
- Direct sunlight
- Extreme cold or heat
- Dust or flammable gasses, fumes or solvents
- Strong vibrations
- Strong magnetic fields such as those found in the vicinity of machinery
or speakers
• Ensure that the insulation for the entire product is neither damaged nor
destroyed. Never dissemble the product! There are no serviceable parts
inside.
• Check the product for damage before each use!
Discontinue product usage if you detect damages! There is danger to life
through an electric shock!
Safe operation must be presumed to be no longer possible:
- if the device is visibly damaged
- if the device no longer works
- if the device was stored under unfavourable conditions for a long period
of time
- following considerable stress during transportation
Range
The transmission range of the radio signals, between the hand-held transmitter and
the radio-controlled switch sockets, is up to 30m under optimal conditions.
This value, however, is the so-called "open space range" (the range when
transmitter and receiver are visible to each other, without interfering influ-
ences).
In practice, however, there may be walls, room ceilings etc. between the
transmitter and the receiver, which reduce the range accordingly.
Due to the different influences on the wireless transmission, no specific
range can be guaranteed.
Nevertheless, trouble-free operation in a single-family home is usually pos-
sible.
Sometimes the range can be considerably reduced due to:
• Walls, reinforced concrete ceilings
• Coated/metallised insulated glass
• Proximity to metallic & conductive objects (e.g., heating elements)
• Proximity to human bodies
• Broadband interferences, e.g. in residential areas (DECT telephones, mobiles, radio-
controlled headphones, radio-controlled speakers, other radio-controlled weather
stations, baby phones etc.)
• Proximity to electric motors, transformers, power-supply units, computers
• Proximity to computers or other electrical devices that are improperly shielded or
operated without any cover
Disposal
a) General
Please dispose of the device when it is no longer of use, in accordance with
the current statutory requirements.
b) Normal and rechargeable batteries
As the end user, you are required by law (Battery Ordinance) to return all used bat-
teries/rechargeable batteries; disposal of them in the household waste is prohibited!
Contaminated batteries and rechargeable batteries are labelled with this
symbol to indicate that disposal in the domestic waste is forbidden. The des-
ignations for the heavy metals involved are: Cd = Cadmium, Hg = Mercury,
Pb = Lead.
Used batteries, rechargeable batteries and coin cells can be returned to collection
points in your municipality, our stores or wherever batteries/rechargeable batteries/
coin cells are sold!
You thereby fulfil your statutory obligations and contribute to the protection of the
environment!
Declaration of Conformity (DOC)
We, Conrad Electronic, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare that
this product conforms with the fundamental requirements and other relevant regula-
tions of the directive 1999/5/EC.
The Declaration of Conformity for this product is available at
www.conrad.com.
Technical Information
a) Hand-held radio transmitter
Transmission frequency ............ 433 MHz
Power supply .............................. 1x 12 V battery, type "23A"
Address codes............................ 4 (to be set via the sliding switch I, II, III, IV)
Switching channels ................... 4 (each with "ON"/"OFF"-button)
Range ........................................... up to 30 m (open space, see chapter "Range")
LED................................................ lights up briefly, when the buttons are used
Operating environment ............. Only suitable for enclosed, dry indoor locations
b) Radio-controlled switch socket
Reception frequency ................. 433 MHz
Operating voltage....................... 230 V/AC, 50 Hz
Protection class ......................... I
Input power ................................. 2000 W Ohm resistive load, 300 W inductive load
Address codes............................ 4 (to be set via the turn-switch I, II, III, IV)
Switching channel ..................... Adjustable with turn-switch "1 2 3 4"
LED................................................ lights up, when the mains socket/consumer load is ac-
tivated
Operating environment ............. Only suitable for enclosed, dry indoor locations
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent
the technical status at the time of printing.
© Copyright 2014 by Conrad Electronic SE.
Advertisement
