Related Manuals for EHRET Voletronic Solar
Summary of Contents for EHRET Voletronic Solar
- Page 1 Voletronic Solar Motorisation for window shutters installation and operating instructions inStallation SpecialiSt perSonnel Valid from 01.2020 E 668.2...
-
Page 2: Notes
Voletronic Solar therefore always to be retained until the prod- window shutter drive. insufficient knowledge uct is disposed of. -
Page 3: Table Of Contents
Contents notes..........2 explanation of signs and symbols . -
Page 4: Explanation Of Signs And Symbols
important notes Explanation of signs and symbols Safety notes Warning notes Only qualified specialist personnel may carry out installation and commission- ing! DaNgEr WarNINg Designates an immediately pending dan- ger that could lead to death or severe in- Incorrect installation could lead to se- juries if the respective precautionary vere injuries and/or damage to prop-... - Page 5 ice could form on the product in the event be observed, as otherwise damage to the of snowfall, sleet or icy rain. Do not operate motor could occur. eHret GmbH assumes equipment until the ice formation is no no liability for damage resulting from incor- longer present, and switch automatic con- rect installation.
-
Page 6: Ec Declaration Of Conformity
GmbH aluminium shutters Bahnhofstrasse 14 - 18 77972 Mahlberg, Germany declares that the product: EHrEt window shutter drive VOLEtrONIC Solar with wireless remote control to which this guideline refers is in conformance with the stipulations of Machinery Directive Directive 2006/42/EC... - Page 7 — name and address of the individual who is authorised to assemble the technical documentation: ralf Gielen location: 77972 Mahlberg, Germany Head of technology Date: 01. 01. 2020 eHret GmbH eHret GmbH andreas Schnaase eberhard Schopferer Head of Sales Management...
-
Page 8: Installation Faqs
Installation FaQs Low-voltage instructions Which parts have been delivered? CautION • W indow shutter Voletronic Solar • 1 × wireless hand-held transmitter Product damage due to improper installa- • D epending on the diagram, 1× or 2× guide tion rail and carriage arm the drive is supplied with the voltage that is • 1 × adhesive buffer, 1× stop buffer, 2× sup-... -
Page 9: Disposal
important notes Disposal Important Important Disposal Disposal • T he following information must be strictly Dispose of all machine parts in accord- adhered to in order to prevent any environ- ance with the applicable legal conditions mental damage. even if the machine is dis- in order to prevent the possibility of any posed of by certified experts, the operator harm to human health or the environment. -
Page 10: Product Description
1 product description 1 Product description Product properties Product description Legend Voletronic Solar is a solar drive system for Drive housing incl. drive module on each max. 2 sashes per side, for actuation of window stop side shutters, completely pre-assembled in 2-part Solar panel consisting of a photovoltaic cell aluminium housing 121 × 66 mm... -
Page 11: Technical Data
Pre-programming NOtES • as the motors correspond to protection Voletronic Solar shutter drives are pre- class iii, they must be supplied with extra- programmed and delivered fully charged. the low voltage and powered only by the photo- following settings are pre-programmed at the voltaic cell supplied. -
Page 12: Scope Of Delivery
1 product description Scope of delivery Voletronic Solar Solar module Motorisation for window shutters contained in the scope of delivery photovoltaic cell Variant a Header installation Fastening frame accessories per sash 1× with 1L/1R, 2L/2R; 2× with 2, 3L/3R, 4... - Page 13 1 product description Coupling with multiple-section sashes tools required Diagram 2l/2r, 3l/3r, 4 not included in the scope of delivery Masonry drill Guide lug Drill Ø 4.2 mm Guide rod pivot bearing 2× rivets N1 Operation torx tX 20+25 Main transmitter, 6603 additional 6634 replacement 1 channel handheld transmit- main transmitter,...
-
Page 14: Installation Instructions
2 Installation instructions Preparation NOtES Before installing the Voletronic Solar window shutter drive, the window shutter must be able to open and close without difficulty. existing manual locking elements (e.g. shutter bolt or espagnolette) can still be used (during holidays, for example), but must be unlocked before electrical operation. -
Page 15: Mounting The Installation Profile And Fastening The Drive Modules
2 installation instructions Mounting the installation profile and fastening the drive modules WARNING Danger of injury/property damage caused by unsuitable fastening materials Select the fastening material in accordance with the load capacity of the installation sub- strates! NOtES • T he selection of the fastening method is de- pendent on the base and is therefore exclu- sively your own responsibility. -
Page 16: Variant A Header Installation
2 installation instructions Variant a Header installation Hook the drive modules into the installation position the installation profile with shutters profile and fasten with the drive screws. closed (dimension X + 5 mm) and align it horizontally. Do not screw the drive screws too tightly! For multiple-section sashes Diagram 2L/2R, 3L/3R, 4 ... -
Page 17: Variant B Reveal Installation
2 installation instructions Variant B reveal installation position the installation profile with lateral Hook the drive modules into the installation fastening brackets (dimension X + 5 mm). profile and fasten with the drive screws. align it vertically and horizontally with a spirit Do not screw the drive screws too tightly! level. -
Page 18: Variant C | Installed At The Bottom
2 installation instructions Variant c Installed at the bottom above the windowsill Hook the drive modules into the installation position the installation profile with lateral profile and fasten with the drive screws. fastening brackets (dimension X + 5 mm). ... -
Page 19: Wiring The Drive Modules
2 installation instructions Wiring the drive modules CautION Malfunctioning due to cable damage Do not cut off or crush the cable in the interior of the product! connect the connection cable to the photovoltaic cell connection (4-point terminal) of the main module ... -
Page 20: Fastening The Solar Module
position the fastening frame of the solar module with the cable exit on the outside. Mark, drill and fasten the fastening points EHRET recommends maintaining a horizontal distance of 95 or 303 mm between the fasten- ing points and a vertical distance of 50 mm to the edge of the reveal. -
Page 21: Connecting The Solar Module
2 installation instructions Connecting the solar module attaching the cover CautION connect the drive connection cable to the so- lar module plug. Malfunctioning due to cable damage position the notching of the cover on the side with the pV cable! ... -
Page 22: Attaching Sash Arms With Guide Rails On The Drive
2 installation instructions attaching sash arms with guide attaching guide rails to the sash rails on the drive NOtES NOtES note whether a left-hand or right-hand sash observe the edge clearance of the guide rails arm is required. with rabbet or surface-mounted installation. the castor of the sash arm must be positioned For models with protruding slats, use the 6220 at the middle of the guide rail at the time of... -
Page 23: Cutting The Coupling Rod To Size And Mounting It
2 installation instructions Cutting the coupling rod to size and mounting it close the double shutter and mark the cen- For multiple-section sashes Diagram 2L/2R, 3L/3R, 4 tre of rotation of guide lug B. afterwards, open the double shutter and measure the distance from a to B. -
Page 24: Crimped Metal Ribbon (Only When Express Hinges Are Used)
2 installation instructions Crimped metal ribbon only when express hinges are used connect the pivot bearing n the spacer us- NOtES ing the axis bolts and lock it in place with a the express hinges used must be secured locking set screw against shifting in place as follows after the in- stallation of the Voletronic window shutter... -
Page 25: Commissioning
Voletronic Solar drive. vement during start-up. Make sure that the solar module is connected Wait until the window shutter is completely... -
Page 26: Checking The Running Direction
3 commissioning Checking the running direction Changing the running direction if necessary press the button. NOtES this step is necessary when the alignment of the window shutter opens evenly without a the sashes is reversed. the leading sash is the sudden movement and brakes gently when sash with the cover strip. -
Page 27: Reset End Positions
3 commissioning reset end positions if necessary press the button and hold it down for more than 4 seconds. the drive confirms with a sudden opening/clo- sing movement. > 4s Hold down the button for more than 4 seconds. -
Page 28: Operation
2 sec. the window shutter is closed completely at a NOtES reduced speed. the automatic obstacle recognition protects the Voletronic Solar against damage and prevents accidents. > 2 sec > 2 sec if a sash encounters an obstacle, strong wind or gusts of wind while opening or closing, the shutter will be stopped automatically. -
Page 29: Thermal Control
4 operation thermal control Emergency mode NOtES NOtES the automatic control is pre-installed at the in normal operation, the operation of the shut- factory. additional equipment is not required. ters is automatically stopped by the obstacle recognition system in strong winds and gusts in automatic mode, each shutter controls its of wind. -
Page 30: Additional Wireless Hand-Held Transmitters
NOtES open the housing with a screwdriver the scope of delivery includes a wireless hand- held transmitter for controlling the eHret Voletronic Solar window shutter drive. 1-channel wireless handheld transmitter with holder replace battery (ref. cr2032) -
Page 31: Troubleshooting
recharge the battery for a short time time, but it no longer works low solar radiation with an eHret power supply to avoid a deep discharge. check the position of the solar panel the window shutter does not close/ Window shutter fitted incorrectly ... - Page 32 © 12.2020 eHret GmbH | e 668.2 | this technical document includes information that is protected by copyright. all rights are re- served. We reserve the right to make changes, including technical changes, in this document. this document has been prepared with...
Need help?
Do you have a question about the Voletronic Solar and is the answer not in the manual?
Questions and answers