Motorola DLR1060 User Manual page 57

7 Question: What happens if I want to end the call during
a Private Call or Direct Call conversation?
Answer: If you are the user who initiated the Private
Reply or Direct Call, you can end the call by long
pressing the Top button. However, if you are the call
receiver, you have to wait for the radio to time out (i.e.
no communications detected for more than 10 seconds)
OR change the channel.
8 Question: I pressed the Top button to queue to talk
privately to the last person transmitting, but when the
user finished talking and I push the PTT button to talk,
the radio gave me a busy tone or other strange tones
and I could not initiate my conversation.
Answer: It is likely there are other users who were
waiting as well to talk to the last person transmitting and
someone else pressed the PTT button before you,
giving you a busy or error tone. Another reason is that
the last person transmitting has gone out of
transmission range.
9 If I press the Top button (either for Private Reply or
Direct Call) and I forgot that I wanted to talk privately
and I did not push the PTT button:
• Question: Would I be still able hear the group
conversations in my channel if I do not press the
PTT button?
Answer: Yes, you should be able to still hear
conversations in your channel.
• Question: How long do I have to talk privately to
User B?
Answer: There is no time restriction on how long you
can take to press the PTT button to talk privately to
user A, as long as your Top button LED indicator is
blinking.
• Question: Does the radio gives me any alert to know
that I am in still in the private queue mode?
Answer: Yes. While waiting in queue to talk privately,
you will receive a call reminder tone after 1 minute of
being in queue, followed by another reminder tone 4
minutes after that. No other reminder is heard
afterwards, but you remain in queue until Private
Reply mode is exited.
• Question: How do I respond to group conversation if
I have already pushed the Top Button (for either
Private Reply or Direct Call) and my Top button LED
indicator is blinking?
Answer: Long Press the Top button to exit the
private queue mode (Top Button LED indicator
English
57