Chapter Ii. Scanning; Preparing Documents; Checking Document Conditions - Plustek eScan A350 User Manual

C
P D
REPARING
Proper document preparation prior to the scan can prevent paper feed errors and
damages to the scanner.


Checking Document Conditions


Loosening Documents
Checking Document Conditions
Make sure the size and ream weight of your documents are acceptable by the
scanner. Refer to "Appendix A: Specifications" of this guide for more information.
To scan multiple documents in a batch from the ADF can increase your work
efficiency and make large scanning tasks easier. The ADF of this scanner accepts a
variety of paper and stationery you may use in your daily work or personal life, such as:

Normal paper whose size and ream weight meet the requirements stated in
"Appendix A: Specifications" of this guide.

Notched paper

Coated paper (e.g., brochure)
Attention
II. S
HAPTER
OCUMENTS
To prevent paper feeding errors and damages to
the ADF unit, strictly follow the instructions below:
 Remove all small objects e.g., paper clips,
pins, staples or any other fasteners attached,
before loading the paper into the ADF.
 Make sure the paper is completely flat with no
creased or curled corners.
 Avoid scanning documents with pencil lead
and newspaper clippings as they will make the
ADF exposure glass and the inner ADF dirty.
If you have to scan such paper, clean the
scanner frequently (refer to "Chapter III. Care
and Maintenance" of this guide for more
information).
34
CANNING