Scanning Documents; Launch The Docaction Ii Program; Scanning From The Scan Button Within The Quick Scan Window Of Docaction Ii Program - Plustek SmartOffice PS186 User Manual

S D
CANNING
There are 4 different ways to operate the scanner:
1. By scanning from the Scan button within the Quick Scan window of DocAction
II program.
2. By scanning from the buttons on the scanner front panel.
3. By scanning from the scan profile buttons within DocAction II window.
4. By acquiring images from the scanner through our TWAIN
TWAIN-compliant application programs.
Attention

Launch the DocAction II Program

Do one of the following to open the DocAction II window:
Click on the Windows Start menu, point to All Programs and then click
DocAction II.
Double-click the icon DocAction II
Right-click the icon
Button Setting in the pop-up menu that opens.
Double-click the icon DocAction II
Scanning from the Scan Button within the Quick Scan
Window of DocAction II Program
The Scan button within the Quick Scan window allows you to quickly scan with
basic scan settings. Follow the steps described below:
1. Place the document or images onto the scanner. (Refer to "Chapter II.
Scanning" of the Scanner User's Guide for more information in placing paper
into the ADF properly.)
2. Launch the DocAction II program.
3
The availability of the TWAIN interface depends on the scanner model you purchase.
OCUMENTS
Before you start scanning, check the following:
The power of both your computer and scanner
is turned on.
The icon
system tray.
Paper is appropriately loaded into the ADF.
in the Windows system tray, and then choose
appears on the Windows
on the desktop.
in the Windows system tray.
21
3
interface within any