Network Environment - Plustek eScan A350 User Manual

13. POWER SWITCH—Use this to turn the scanner ON or OFF.
14. POWER RECEPTOR—Connects the scanner to a standard AC power outlet by the
included AC adapter.
15. ETHERNET PORT—Connects the scanner to a port on the Ethernet hub by the
Ethernet cable.
16. USB PORT—Connect a USB flash drive or other USB device.
17. USB PORT—Connects the scanner to a USB port on your computer.
N E
ETWORK NVIRONMENT
 Basic knowledge of network setup and configuration will be helpful for you to operate
this scanner. When you are using this scanner in a corporate environment, you may
need to consult your network administrator or ISP.
 The scanner requires a DHCP server. A DHCP server automatically provides all
devices within a network environment with IP addresses, so there is no need to
manually set an IP address for the scanner.
 Please make sure there is an active Internet connection while using the scanner. The
scanner requires access to the Internet to retrieve the date and time.
 When saving scanned documents to a computer or mobile device, the scanner and
the target device must be on the same segment of the network.
 The actual wireless data transmission speed varies depending on the wireless LAN
environment in which you use this device. Other electrical devices (e.g. microwave
oven), a large distance, obstruction, or interferences between the participating
devices and the wireless access point/router can cause the data transmission to slow
down or not be possible at all.
6