Introduction; Vca (Video Content Analysis) - HIKVISION Performance Series Configuration Manual

P e r f o r m a n c e S e r i e s T h e r m a l C a m e r a C o n f i g u r a t i o n G u i d e

Introduction

This guide explains how to configure a Hikvision Performance Series thermal camera.
This configuration guide is for the following Hikvision Performance Series cameras:
2CD-TD1217-x/V1
•
2CD-TD2117-x/V1
•
2CD-TD2617-x/V1
•

VCA (Video Content Analysis)

1. Enter the cameraʼs IP address in a Web browser to access the cameraʼs interface.
2. Go to Configuration > Maintenance > VCA Resource Type.
3. Check the Temperature Measurement + Behavior Analysis radio button (default).
4. Click the Save button.
5. Go to Configuration > Local to view the Live View parameters.
6. Check the Rules − Enable radio button.
C G P S T h e r m a l C a m e r a s 0 7 2 6 1 9 N A
Figure 1, VCA Resource Configuration
4