INVENTOR PFVI32-09WF User Manual page 5

Function buttons
1. "ON/OFF" button
Press the ON/OFF button to start or stop the unit.
By turning off the unit, functions of Timer and Sleep are deactivated as
well.
2. "SPEED" button
Press the SPEED button to select the fan speed.
Fan speed setting will change as follows:
3. / buttons
Press the
Press the
The temperature can be changed quickly by pressing the button
continuously.
Setting temperature range is 16
4. "COOL" button
Press the COOL button, the mode of operation is shifted to cooling.
5. "HEAT" button
Press the HEAT button, the mode of operation is shifted to heating.
Note: cooling only unit has no heating function
6. "SWING" buttons (SWING and SWING
Press the buttons to activate the corresponding swing function (up/
down or left/right). To deactivate the corresponding swing function,
press the button again.
Up/down (left/right) has memory function per operation mode and will
remain if you stop and start the unit.
When selecting the Swing setting for the current operation mode, the
other modes' swing settings will not be affected.
button to increase the setting temperature by 1°C.
button to decrease the setting temperature by 1°C.
C ~ 32 C.
o o
3
)