Use Of Remote Control; Insert/Replace Batteries; Automatic Operation Mode (Auto); Cooling/Heating Operation Mode - INVENTOR PFVI32-09WF User Manual

Use of Remote Control

Insert/replace batteries

1. Open the cover by sliding it as shown above.
2. Insert two brand new batteries AAA, position the batteries according to
electric pole indications (+ & -).
3. Re-insert the cover by sliding it as shown above.

Automatic operation mode (AUTO)

1. Press the ON/OFF button for the air conditioner to start operating.
2. Press the MODE button and select the automatic operation mode
(AUTO).
During AUTO mode, the unit will set the temperature and change
between cooling, heating and fan modes according to indoor
conditions.
3. Press the SPEED button to set the desired fan speed.
Available settings for fan speed: LOW, MID, HIGH, AUTO.
Cooling/Heating operation mode (cooling-only units do not have
heating mode)
1. Press the ON/OFF button for the air conditioner to start operating.
2. Press the MODE button and select cooling or heating operation mode.
3. Press the
can be set at 1
4. Press the SPEED button to set the desired fan speed.
5. Available settings for fan speed: LOW, MID, HIGH, AUTO.
or button to set the desired temperature, temperature
C difference, with range from 16
o
9
C ~ 32 C.
o o