Set Up The Guest Network - Tenda AC11 User Manual

5.2.2

Set up the guest network

Scenario: A group of friends are going to visit your home and stay for about 8 hours.
Goal: Prevent the use of WiFi network by guests from affecting the network speed of your
computer for work purposes.
Solution: You can configure the guest network function and let your guests to use the guest
networks.
Assume that the parameters you are going to set for the guest WiFi network:
WiFi names for 2.4 GHz and 5 GHz networks: John_Doe and John_Doe_5G.
−
WiFi password for 2.4 GHz and 5 GHz networks: Tenda+245.
−
The shared bandwidth for guests: 2 Mbps.
−
Configuring procedures:
Step 1 Start a web browser on a device connected to the router and visit tendawifi.com to log in
to the web UI of the router.
Step 2 Choose Wireless Settings > Guest Network.
Step 3 Set Guest Network to Enable.
Step 4 Change 2.4 GHz WiFi Name, which is John_Doe in this example.
Step 5 Change 5 GHz WiFi Name, which is John_Doe_5G in this example.
Step 6 Set Guest Network Password, such as to Tenda+245.
Step 7 Select a validity time from the Validity drop-down box, which is 4 hours in this example.
Step 8 Set the bandwidth in the Shared Bandwidth for Guests drop-down box, which is 2 in this
example.
Step 9 Click OK at the bottom of the page.
---End
During the 4 hours after the configuration, guests can connect their wireless devices, such as
smartphones, to John_Doe or John_Doe_5G to access the internet and enjoy the shared
bandwidth of 2 Mbps.
41