Lan Parameters - Tenda AC11 User Manual

11.3

LAN parameters

On this page, you can:
Change the LAN IP address and subnet mask of the router.
◼
Change the DHCP server parameters of the router.
◼
The DHCP server can automatically assign IP address, subnet mask, gateway and other
information to clients within the LAN. If you disable this function, you need to manually
configure the IP address information on the client to access the Internet. Do not disable the
DHCP server function unless necessary.
Configure the DNS information assigned to clients.
◼
To access the configuration page, log in to the web UI of the router, and choose Administration >
LAN Parameters.
Parameter description
Parameter
LAN IP Address
Subnet Mask
DHCP Server
Start IP Address
End IP Address
Preferred DNS Server
Description
It specifies the LAN IP address of the router, which is also the management IP
address for logging in to the web UI of the router.
It specifies the subnet mask of the LAN port, used to identify the IP address range of
the local area network.
When the DHCP server is enabled, the router automatically assign IP address to
clients connected to the router
It specifies the range of IP addresses that can be assigned to devices connected to
the router. The default range is 192.168.0.100 to 192.168.0.200.
It specifies the primary DNS address of the router, which is assigned to the clients.
You can change it if necessary.
Make sure that the primary DNS server is the IP address of the correct DNS server or
DNS proxy. Otherwise, you may fail to access the internet.
98