Introduction; Parts List; Additional Products Required; Additional Tools Required - Bosch AUTODOME IP starlight 5100i IR Installation Manual

Hide thumbs Also See for AUTODOME IP starlight 5100i IR:
Table of Contents

Advertisement

AUTODOME IP starlight 5100i IR
2

Introduction

2.1

Parts List

2.2

Additional Products Required

Quantity
* Refer to the chapter Preparing Wiring.
2.3

Additional tools required

The table that follows is a list of additional tools (not supplied by Bosch) required to install an
AUTODOME camera or its accessories:
Bosch Security Systems
This equipment should be unpacked and handled with care. Check the exterior of the
packaging for visible damage. If an item appears to have been damaged in shipment,
notify the shipper immediately.
Verify that all the parts listed in the Parts List below are included. If any items are
missing, notify your Sales or Customer Service Representative from Bosch Security
Systems.
Do not use this product if any component appears to be damaged. Please contact Bosch
Security Systems in the event of damaged goods.
The original packing carton (if undamaged) is the safest container in which to transport
the unit and must be used if returning the unit for service. Save it for possible future use.
Quantity
Component
1
AUTODOME IP starlight 5100i IR camera
1
Screwdriver, T15 Torx
4
MAC address labels
1
Pendant interface plate
2
M4 screw
1
IP66 kit
1
PE foam
1
3/16" Allen key (Hex key)
1
Quick Installation Guide
1
Safety instructions
Item
100 m
Ethernet cable (Cat5e or better)
maximum
*
Power cable (24 VAC)
*
Alarm wiring as needed
*
Audio wiring as needed
1
microSD card (maximum 32 GB (microSDHC) / 2 TB (microSDXC)) (user-
supplied)
Installation Manual
Introduction | en
11
2021-02-19 | 0.7 |

Advertisement

Table of Contents
loading

Table of Contents