Table of Contents
Advertisement
Oasis
Manually entering time code and user bits
Selecting the
ENTER TIME CODE
editor, and selecting the
user bit editor.
From the editor enter the desired time code and user bits
then select the green enter key to set the time code and user
bits.
Turrning on incremential user bits
Selecting the
INC USER BITS
incremential user bit feature. When the incremential user bits
is set to on the user bits will increase by 1 eveytime a new
take is recorded.
Jamming time code and user bits
Select
to jam time code from an external source
JAM T.C.
connected to the time code in on Nomad.
Select
to jam the user bits from an external source
JAM U.B.
connected to the time code in on Nomad.
Select
to jam the user bits from Nomads internal
JAM DATE
calander.
Select
from the time code from Nomads internal
JAM TIME
clock.
key will open the time code
key will open the
ENTER USER BITS
key will toggle on and off the
13
Time Code Menu
Advertisement
Table of Contents
Need help?
Do you have a question about the Nomad Oasis and is the answer not in the manual?
Questions and answers