Specifications - Devine Onyx 10SXA User Manual

Specifications

General Specifications:
– solid subwoofer with strong plywood housing
– metal grille with acoustic foam on the inner side
– acoustic foam protects internal components from moisture, dust, confetti and other matter
– grille covers the entire front fro optimum protection of internal components and for a clean look
– high quality finish with black scratch-resistant lacquer
– rubber feet
– M20 flange for distance rod installation (distance rod not included)
– built-in 3-channel power amplifier
– two outputs for passive satellite speakers
– compatible with Onyx passive speakers with a minimum impedance of 8 Ohms
Technical Features:
– Bluetooth receiver built-in
– various line inputs also supported
– combo XLR-jack line inputs and stereo RCA
– bass capacity: 100W RMS
– treble capacity: 2x 75W RMS
– subwoofer frequency range: 40 – 125 Hz
– max. SPL subwoofer: 116 dB
– woofer type: 10" woofer with 2 inch voice-coil
– satellite outputs: 2x locking speaker connections
– dimensions: 350 x 400 x 400 mm
– weight: 12 kg
– power consumption: 300 W
– supply voltage:100 / 240V AC, 50/60 Hz
– fuse: T5AL 250V (in setting 220 – 240 V), T10AL 250V (in setting 100 – 120 V)
The information included in this manual is subject to change at any time and without notice
Version: 1.0 Date and Author Initials: 11-01-2020 RV Revision Date and Author Initials: