Specifications - Devine Onyx 15SXA User Manual

Specifications

General specifications for all models:
– solid subwoofer with strong plywood housing
– available in 15 and 18 inch
– metal grille with acoustic foam on the inside
– acoustic foam protects internal components from moisture, dust, confetti and other matter
– grille covers the entire front for optimum protection of internal components and for a clean look
– high quality finish with black scratch-resistant lacquer
– rubber feet
– filtered and unfiltered line inputs
– M20 flange for distance rod installation (max. capacity 30 kg, distance rod not included)
– built-in CLIP limiter
– power LED indicator and Clip LED indicator
– two-band tone control (Bass / Treble)
– built-in 3-channel power amplifier
– two outputs for passive satellite speakers (8-Ohm minimum)
– IEC C14 power input with fuse holder
– on/off switch
Connections Mixer Section:
– combo line inputs (6.35mm TRS jack and 3P XLR)
– link outputs via balanced 3P XLR
Technical specifications per model:
Model Onyx 15SXA Onyx 18SXA
Frequency Range 40 Hz – 250 Hz 30 Hz – 250 Hz
Power Capacity (RMS) 840 W (600 + 120 + 120)
Maximum SPL 126 dB 136 dB
Low Frequency Speaker 15" woofer with 3" voice coil 18" subwoofer with 4"
voice coil
Power Supply 100 / 240V AC, 50/60 Hz
Fuse T5AL 250V (in 220 – 240 V mode)
T10AL 250V (in 100 – 120 V mode)
Nominal Maximum Power 1000 W
Consumption
Dimensions 545 x 720 x 640 mm 625 x 720 x 695 mm
Weight per Speaker 33 kg 39 kg
The information in this user manual is subject to change at any time without notice.
Version: 1.0 Date of creation and author's initials:11-01-2020 RV Revision date and author's initials: -