Table of Contents
Advertisement
Table 3-5: Basic Parameters in BreezeACCESS VL SU
Parameter
Maximum Tx Power for Modulation
Levels 1 to 5
Maximum Tx Power for Modulation
Level 6
Maximum Tx Power for Modulation
Level 7
Maximum Tx Power for Modulation
Level 8
Antenna Gain (units with external
antenna)
ATPC Option
Best AU Sup
port
Preferred AU MAC Address
VLAN Link Type
VLAN ID-Management
Authentication Algorithm
Data Encryption Option
Security Mode
Default Key
Key 1 to Key 4
NOTE
Once the basic parameters are configured, the unit must be reset in order to activate the
new configuration.
Manual Revision 1.0
Default Value
De
pend on HW revisio
n
and Sub Ban
d
Ac
cording to the anten a
n
su
pplied with the unit and
the Sub Band.
Enable
Disable
00-00-00-00-00-00 (none)
Hybrid
65535
Open System
Disable
WEP
Key 1
00......0 (32 zeros,
meaning no key)
Configuring Basic Parameters
Comment
Max Tx Pow
er cannot be
higher than the upper
limit according to the Sub
Band in use.
If set to "Not Set Yet",
must be configured
according to actual value,
taking into account
cable's attenuation.
Applicable only when
Best AU Support is
enabled
Availability of security
parameters depends on
support according to the
country code.
3-13
Advertisement
Table of Contents
