Warnings; Technical Features; Introduction - Proteco MATRIX Installation And User Manual

1.

WARNINGS

This manual for MATRIX series contains important information concerning personal safety.
An incorrect installation or an improper use may lead to severe injuries.
Read carefully and pay particular attention to the safety sections marked by the yellow triangle
The installation of automatic doors, gates and barriers must comply with the Machinery Directive 2006/42/CE and EN 12453 regulation,
and performed by qualified personnel.
Make sure the main power line is equipped with state of the art safety grounding system; as well be sure the whole installation is
protected by a power cut switch and against overcurrent.
Make sure the area is clear from flammable gases and/or electromagnetic interferences: it could lead to very dangerous injuries.
Switch the power and batteries OFF before any operation.
After installation, packaging and waste materials (cardboard, plastic, metal parts etc.) must be kept away from children as they could be
potentially harmfull. Use only original spare parts. Any alteration to the system is prohibited.
Proteco Srl will not respond in case of using additional and/or fake spares.
Before commissioning the system, deliver the last pages of this manual to the user (section 5. END USER'S TIPS starting from page 13).
Proteco S.r.l. reserves the right to make changes to the product without notice.
2.

TECHNICAL FEATURES

2.1

Introduction

MATRIX range is the new Proteco's electromechanical rack-driven motor generation designed to automate sliding gates in residential, block and
industrial areas.
Any other use than that described is to be considered improper and prohibited.
All models grant the mechanical locking of the gate with an irreversible gear system; it is therefore not necessary to install any type of lock.
MATRIX works by electricity, in case of power cut the motor can be manually unlocked using a special lever system protected by key.
2.2 Technical features
Power supply
Motor voltage
Start up current
Rated current
Rated power
Fuse
Start up capacitor
Standard capacitor
Start up thrust
Rated thrust
Thermal cut off
Max. opening speed
Max. leaf weight
Duty cycle
Operating temperature
IP rating
Limit switch type
Matrix 2500 Matrix 1800
230 V 50/60 Hz 230 V 50/60 Hz
6 A 4,5 A
2,5 A 2 A
230 V 50/60 Hz 230 V 50/60 Hz
550W 500W
8A 8A
25 µF 30 µF
25 µF 20 µF
2000 N 1400 N
1100 N 900 N
150°C 150°C
11 m/min 11 m/min
2500 Kg 1800 Kg
50% 50%
-30° C ÷ + 55° C -30° C ÷ + 55° C
44 44
Mechanical/ Mechanical/
Magnetic Magnetic
.
Matrix BLDC Matrix High Speed
230 V 50/60 Hz 230 V 50/60 Hz
4,5 A 3 A
1,4 A 1,3 A
48 V dc 48 V dc
350W 300W
5A + 30A@48V 5A + 30A@48V
- -
- -
1600 N 1400 N
1000 N 700 N
- -
13 m/min 20 m/min
2500 Kg 1800 Kg
80% 80%
-30° C ÷ + 55° C -30° C ÷ + 55° C
44 44
Mechanical/ Mechanical/
Magnetic Magnetic
3