Table of Contents
Advertisement
appropriate for most situations.
Use "
" or "
Press "
digit
Press "
" key to store the new setting value
and exit.
Calibration factor (CAL)
The calibration factor CAL serves to calibrate the
display for a specific frequency when the
frequency of a single signal is known. The field
strength value measured internally is multiplied by
the value of CAL that has been entered and the
resulting value is displayed. The CAL factor is
often used as a means of entering the sensitivity
of the field sensor in terms of its frequency
response in order to improve measurement
accuracy.
" to select the desired digit.
" and "
" button to change the
24
Advertisement
Table of Contents
