Analog Bar Graph Setup-4 - Cablematic Tenmars User Manual

data logger memory mode (3.SET). will
show on the display.
To exit without clearing memory, press " " key
To clear the memory, press " " then press " "

11.4 Analog bar graph setup-4

While the meter in ON, press hold " " button
and press " "，button to enter Setup Mode.
Press " " button 3 more times to : enter
analogue bar graph setting mode. The "graph"
unit is flashing. Current setting of x1, x10, or x100
is displayed at bottom of graph. X1 is normal
setting. X10 is 10 times more sensitive, x100 is
100 times more sensitive.
Press " " or " " to select the desired value:
Press " " key to store the new setting value and exit.
22