Setup Mode; Clock Setup-1 - Cablematic Tenmars User Manual

11 Setup Mode

While the meter is on, press hold " " button
and " " button to enter the setup mode.
Press " " button to scroll through the setup
function.
Push " " button to save setup data.
Note 1 : you can set up 6 different functions in
setup mode
Default Clock Setup
setup 1 : Setting the alarm limit value (ALARM).
setup 2 : Clear data logger memory.
setup 3 : Analogue bar graph x1 x10 x100.
setup 4 : Auto Power Off Time.
setup 5 : Setting the calibration factor (CAL).

11.1 Clock Setup-1

Press hold " " button and press " " button
first to enable Clock Setup.
This meter clock is 24 hour time setting.
Use " " or " " to change digit(Hour→day→
Month→year→Minute).
19