Table of Contents
Advertisement
field strength units (µA/m or mA/m) and power
2
2
2
density units (µW/m
, mW/m
or µW/cm
) using
the standard far-field formulae for electromagnetic
radiation.
9.4 Result modes
The bar graph display always shows the
instantaneous measured dynamic range value.
The digital display shows the result according to
one of three modes, which can be selected.
Instantaneous : The display shows the last value
measured by the sensor, no symbol is displayed.
Instantaneous mode is the default setting when
the meter is turned on.
Maximum instantaneous (MAX) : The digital
display shows the highest instantaneous value
measured so far, the "MAX "symbol is displayed.
Average (AVG) : The digital display shows the
average value measured, the "AVG" symbol is
displayed.
The following graph shows of Instantaneous
(actual), MAX (hold), AVG and MAX/AVG:
13
Advertisement
Table of Contents
