Measurement Procedures And Preparation; Power Button; Data Hold Button - Cablematic Tenmars User Manual

10 Measurement Procedures and
Preparation
Battery loading : Remove the battery cover on the
back and put a 9V battery inside.
Battery replacement: When the low battery
symbol of "
battery should be replaced with a new one.
10.1 POWER button：
"button to power on.
Press"
"button to power off.
Press"

10.2 Data hold button:

Press the "
"HOLD" appears on the screen to allow you to
read the data.
" appears on the LCD display, the
" button to go into hold mode, and
14