Auto Power Off Time Function Setup-5; Setting The Calibration Factor (Cal)-6 - Cablematic Tenmars User Manual

11.5 Auto Power Off Time function setup-5

While the meter is on, press and hold "
button and press "
power off Setup Mode.
Press " " button 4 more times.
Press " " and "
value. Auto power off time default setting is 15
minutes. Maximum auto power off time : 99
minutes. Set value to 00 to disable auto power off.
Press " " key to store the new setting value
and exit. The symbol

11.6 Setting the calibration factor (CAL)-6

Press hold "
enter Setup Mode.
Press " " button 5 more times to enter the
calibration factor setup mode, The CAL setting
range is from 0.10 to 9.99. Default is 1.00 which is
"，button to enter the auto
" button to change the
is displayed.
" button and press "
23
"
" button to