PRODUCT FEATURES S900 and S1000 Models: Ergonomic heated seat – with four temperature settings (High/Med/Low/O ). Instant and endless warm water – the cutting-edge instant ceramic heating system ensures an endless warm water stream for posterior and feminine washes while reducing power consumption by up to 60% over conventional storage tank systems.
GROUNDING & GFI OUTLET INSTRUCTIONS Ground GFI Outlet Bidet Seat Cord with Grounding Pin Grounding Pin test reset Receptacle DANGER- Improper use of the grounding plug can result in a risk of electric shock. Extension cord If it is necessary to use an extension cord, use only a three wire extension cord with a threeblade grounding plug, and a three-slot receptacle that will accept the plug of the product.
Page 9
The S900 and the S1000 have the following dimensions: The S900 and 1000: Round Size The S900 and 1000: Elongated Size...
Page 13
The T-Valve connects to the ll valve directly under your toilet tank - it does not connect at the wall. Only connect cold (from your toilet water supply line).
Page 14
opening in the mounting plate and insert mounting bolts through adjustable brackets and mounting holes. Be sure that the square mounting bolt head is even with sides of adjustable bracket.
Page 17
Quick Reference Guide: Remote Control ‘Wide Spray’ button Spray Nozzle Clean+ For the Swash 900 models the Move, Dry, Nozzle Clean+, and Deodorize functions are excluded...
Page 18
Quick Reference Guide: Remote Control (Page 2) ‘Wide Spray’ indicator When the “Wide Spray” button is pressed, the indicator cycles through the following options: Concentrated Stream (Blue) Medium Stream (Pink) Wide Stream (Red). ‘Dry’ button Use this button to engage 3 levels of the warm air dryer.
Page 20
Move (Nozzle Oscillation) Function – S1000 Only Warm Air Dryer – S1000 Only...
Warm Air Dryer Temperature – S1000 Only While air dryer function is operating, press the Water Pressure/Dry Temp. button “+” and “-“ to adjust warm air dryer temperature to desired level. There are 4 levels for the warm air dryer: Low – Med – High- O . Additional Features Deodorization –...
Page 22
been cancelled. The body sensor in the seat is now bypassed and the wash & air dry functions will work without anyone physically on the seat. Use caution!
Page 27
1. Make sure that the Water temperature Water (wash spray) not heated 1. Water temperature set to o setting is on (Low- Blue light, Med- Pink 2. Resettable fuse blown light, High- Red light, O - No light) 2. The bimetal resettable fuse may blow if the temperature exceeds over the normal level.
Need help?
Do you have a question about the Swash 900 and is the answer not in the manual?
Questions and answers