Jensen JTA-575 User Manual page 14

COPYING A CD
This unit allows you to copy tracks from a CD to either a USB flash drive or SD; 1 file at a time, 1 folder at a time or all
files at one time.
I) COPY 1 TRACK
1. Tap the FUNCTION BUTTON to select CD mode.
2. Insert a USB flash drive or SD/MMC CARD.
3. Select the track which you want to copy and press PLAYto begin playing the track.
4. Press the REC button during the playback of the copying track from CD and "ONE" will be flashing on the display.
5. Press the REC button again to confirm and then "WAITING" while the unit prepares for recording.
6. The unit will re-start to play the track. The REC icon and either the "USB" or "SD" icon will be flashing on the
display. The file is now being copied to the storage device.
7. Once the copy process is completed, the unit will stop playback automatically.
8. The display will show "END" and go back to "CD" mode.
II) COPY 1 FOLDER (FOR MP3/WMA DISC ONLY)
1. Tap the FUNCTION BUTTON to select CD mode.
2. Insert a USB flash drive or SD/MMC CARD.
3. Press ALBUM  or ALBUM  to search for the folder you want to copy. Select the folder.
4. Press the REC button and "ONE" will be flashing on the display. Press the SKIP UP
button to select "DIR" on the display. Press the REC button again to confirm and then "WAITING" while the unit
prepares for recording.
5. The unit will re-start to play the folder at the beginning. The REC icon and either the "USB" or "SD" icon will be
flashing on the display. The folder is now being copied to the storage device
6. When the USB or SD icon stops flashing, it means that the folder copying is completed.
III) COPY ALL TRACKS
1. Tap the FUNCTION BUTTON to select CD mode.
2. Insert a USB flash drive or SD/MMC CARD.
3. Press the REC button and "ONE" will be flashing on the display. Press the SKIP UP
button to select "ALL" on the display. Press the REC button again to confirm and then "WAITING" while the unit
prepares for recording.
4. The unit will re-start to play the disk at the beginning. The REC icon and either the "USB" or "SD" icon will be
flashing on the display. All tracks are now being copied to the storage device.
5. When the USB or SD icon stops flashing, it means that the folder copying is completed.
SPLIT TRACK FUNCTION FOR USB/SD RECORDING FOR TURNTABLE/CASSETTE/AUX IN
1) MANUAL SPLIT OPERATION PROCEDURE:
During USB/SD recording, the USB/SD icon will flash on the display. If a new track is required, press mode button
on the unit or remote control, display will show "TS", then the unit will stop recording momentarily and resume
again. A new file will be created on the USB/SD device representing a new track.
2) AUTO SPLIT OPERATION PROCEDURE:
- Before USB/SD recording, select audio source, then press the MODE button on the unit or remote control. The
display will show "T-ON", which means the auto split function is activated. Start USB/SD recording and the unit
will automatically detect the silent part between each track, and create a new file to move on to start recording
the next track.
- If not required: press the MODE button on the unit or remote control before USB/SD recording. The display will
show "T-OF", which means auto split has been deactivated.
NOTES:
- Recording with auto split mode can cause several seconds of the beginning track to be cut off when the new
recording is being created. If you notice the beginning of the tracks are getting cut when recording, use manual
split mode instead of auto split mode.
- Recording with auto spit, during USB/SD recording from turntable / cassette, when the unit has detected any
particular silent part, the turntable / cassette player will stop momentarily. The turntable / cassette player will
resume operation once the USB/SD device has begun creating a new file to be recorded.
ID3 DISPLAY
During MP3 music playback, press the ID3 button on the remote control, to show the ID3 information (if available) on
the display. ID3 information can include the song tile, artist name and album name during MP3 playback.
E-13
/ SKIP DOWN
/ SKIP DOWN