Table of Contents
Advertisement
1.
Handle- Used to manoeuvre and position the CR2
2.
Recovery tank lid- Allows access to recovery tank and creates a seal to ensure suction
3.
Solution tank lid- Allows access to the solution tank and prevents external contamination of solution tank
4.
Accessory racks for hoses, cords, tools etc.- Two large racks on one side and three small racks on each side of
the machine.
5.
Wand storage bracket and Velcro strap. Allows the operator to secure a wand attachment to the machine for
ease
of transport
6.
Non-marking front 4" locking casters and rear 10" wheels
7.
Recovery/vacuum hose inlet barb- connect your recovery vacuum hose to this barb
8.
Feed hose line for chemical with threaded bottle cap- secures the feed hose line to the chemical bottle
9.
Bottle holder for chemical feed system- Holds up to a one gallon chemical bottle
10.
Not Used on UK models
CR2 Manual 29/03/21
MACHINE LAYOUT
Page 12 of 29
Advertisement
Table of Contents
