Table of Contents
Advertisement
The 3G Auto Dialler has two inputs for a connection to electrical equipment plus separate
hardware for temperature, tilt, mains failure and external sensing. When these are triggered the
unit will call or text up to 3 separate numbers which can be stored on to the unit.
To programme the numbers you want to use, follow the examples below by sending the text
message command to the simcard in the auto dialler.
Example
Send a text message to the sim card. -
#SAVE1=07712345678#
#SAVE2=01903123456#
#SAVE3=07123456789#
A maximum of 3 phone numbers in total.
To delete a stored number use #DEL followed by position number.
Example
#DEL=1#
-
This deletes stored contact number 1
Note
Please send one message at a time and wait for the auto dialler to send you the text
acknowledgement #NUMBER STORED before you try to send another number.
Programming Contact Numbers
(A maximum if 15 digits per phone number)
- This stores the mobile/landline phone number as contact number 1
- This stores the mobile/landline phone number as contact number 2
- This stores the mobile/landline phone number as contact number 3
Page 6
Advertisement
Table of Contents
