Repeat Play; Random Play); Searching From Cd Text - Alpine CDE-9852 Owner's Manual

6
After pressing (OPEN) to open the front panel,
press to eject the disc.
• Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
• If the CD does not eject, press and hold
• The CD-player can play discs containing audio data, MP3 data and
WMA data.
• A WMA format file that is protected by DRM (Digital Rights
Management) cannot be played back on this unit.
• The track display for MP3/WMA data playback is the file numbers
recorded on the disc.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
MP3/WMA Play Display
The folder number and file number will be displayed as
described below.
F01 T03 10'15
Folder number File number
display display
• Press TITLE to switch the display. Please see "Displaying the Text"
(page 13) for information about display switching.
• If the folder number or file number is three digits, "F" or "T" is not
displayed.

Repeat Play

Press 4 to play back repeatedly the track being
played.
The track (file) will be played repeatedly.
Press 4 again and select off to deactivate repeat play.
CD mode :
: Only a track is repeatedly played back.
MP3/WMA mode :
: Only a file is repeatedly played back.
: Only files in a folder are repeatedly played back.
M.I.X. (Random Play)
Press 5
The tracks (files) on the disc will be played back in random
for at least 2 seconds.
sequence.
To cancel M.I.X. play, press 5
CD mode :
MP3/WMA mode :
Elapsed time

Searching from CD Text

Tracks can be searched and played by using the CD text on the disc. In
the case of discs that do not support text, searches can be made by using
the track numbers.
1
2
• Press and hold
• CD text search cannot be made during M.I.X. play.
in the play or pause mode.
: The tracks are played back in random sequence.
: Only files in a folder are played back in
random sequence.
: The files are played back in random sequence.
Press during play.
This will set the search mode.
Turn the Rotary encoder to select the desired
track, then press MODE.
This will play the selected track.
for at least 2 seconds in the search mode to
cancel. Or, the search mode will be canceled when an operation has
not been performed in 10 seconds.
again.
9
-EN