Advertisement
5.
Insert the modular screws in the 650w back panel (C) into the keyholes in the curved
panel (D), making sure that all of the screws have engaged into the keyholes. (see
step 1 for method).
7.
25
Y
Small Worksurface
Fixing Bracket
(x5)
Attach the worksurface fixing brackets (Y) to the Den structure using 1x M6x20mm
socket button head machine screw (W) per bracket (Y) in the positions shown above.
Use the top holes for a 730mm worksurface height and the bottom holes for a
750mm worksurface height (see above). When fixing the brackets to the structure,
make sure to pass the machine screws through the 7mm hole and not the slot.
DEN.Curve Assembly Instructions
D
Curved Panel
100
W
M6x20 Button
Head Bolts
(x5)
100
Y
730mm Worksurface height
750mm Worksurface height
6.
Z
Bottom Connector
Link
Tap the top of the 650w back panel (C) with a cushioned mallet to fully engage.
Tie the 650w back panel (C) to the curved panel (D) using a bottom connector link (Z).
(see step 2 for method).
8.
25
W
M6x20 Button
Head Bolts
(x5)
Lower the worksurface (E) onto the brackets attached to the structure in step 7.
Attach the worksurface fixing brackets (Y) to the underside of the worksurface (E)
using 1xM6x20mm socket button head machine screw (W) per bracket (Y).
100
100
DWG No: SASS-0065
Revision: A (27/10/15)
Drawn by: JB
Drawn date: 13/07/15
Advertisement
