Pentair MICROBRITE Installation And User Manual page 9

DRY/SEALED CONDUIT INSTALLATION (USE PROVIDED KIT)
1. Note: The the pool water level must be below the
level of the 1.5" return fitting where the MicroBrite
will be installed.
2. Unscrew the adaptor from the body of the light
and remove it along the 3m cord.
3. Pass the 3m cord inside the O-Ring.
Install O-Ring then apply provided
lubricant to seal fitting and conduit
from water entry
Adaptator
(final location)
O-Ring
(final location)
LIGHT INSTALLATION
4. Place the O-Ring behind the lens body.
5. Apply the provided lubricant on the O-Ring.
6. Pass the 3m cord inside the adaptor.
7. Place back the adaptor on the body of the light.
8. Resume the installation process at Step 1 (see
Adaptator
Adaptator
MicroBrite color led light for pool and spa Installation and User' s Guide
page 7).
1.5" Standard wall fitting
O-Ring
9