Pentair MICROBRITE Installation And User Manual page 8

8
6. Insert the MicroBrite light into the 1.5" wall fitting. By hand start the process of threading the male threads
on the MicroBrite' s white threaded adaptor ring into the female threads of the wall fitting.
Insert adaptor male thread
adaptor ring into female
thread of wall fitting. By hand
then turn light clockwise.
7. Place Microbrite light installation tool (P/N
602158Z) over the front of the light while turning
the tool and light clockwise. Note: If the light does
not turn smoothly, pull the light slightly out and be
sure that it' s seated properly and the wall fitting is
free of debris, then reinstall the light.
8. Turn the light clockwise while threading it into the
wall fitting to un-twist the power cord.
Installation tool
MicroBrite color led light for pool and spa Installation and User' s Guide
LIGHT INSTALLATION
9. Turn the light clockwise (approximately 5 turns)
10. Note: Once the light is tightly installed remove the
1.5" Standard wall fitting
Cord will un-twist
as light is turned
clockwise into fitting
so that it is threaded tightly into the wall fitting.
tool be sure the light cannot be unscrewed using
your fingers. The light should be secured in place
so that it can only be removed by using the light
installation tool.
Light cable to junction box