Pentair MICROBRITE Installation And User Manual page 14

14
OPERATING MICROBRITE LIGHTS USING AN AUTOMATION SYSTEM
MicroBrite color lights can also be automatically controlled using the Pentair
IntelliPool, Maestro or Speedeo.
Refer to the automation device user manual for wiring.
An outlet is a dry contact and
does not supply any voltage.
Selecting color and show modes using an IntelliPool, a Maestro or a Speedeo automation device.
FOR INTELLIPOOL AND MAESTRO:
The MicroBrite Color light can be controlled with the
IntelliPool (p/n INTP-1010) or either the Maestro (p/n
SB-PF-ENS-002D) sold separately. The IntelliPool /
Maestro provides complete control of your MicroBrite
color lights:
• directly on the Control Center, by selecting light-
ing menu / color mode / mono or party ...
• on the App by selecting color mode in Lighting
window.
• on the IntelliPool / Maestro server by select-
ing color mode in Lighting window. Previously,
you need in Pool properties / tick the check box
"IntelliBrite" and then save.
MicroBrite color led light for pool and spa Installation and User' s Guide
ELECTRICAL CONNECTION
230 V ~ 10A
FOR SPEEDEO:
The MicroBrite Color light can be controlled with the
Speedeo (p/n SB-PF-SPO-003C, sold separately). The
Speedeo provides complete control of your MicroBrite
color lights directly on the Speedeo itself, by:
2A
2A
• Starting the secured Install menu (from the main
menu, simultaneously hold down Esc and Valid for
3 secs. A star appears in the top right corner of the
home screen).
• On the Inlets / E1 sub-menu, selecting LIGHTING
to indicate that a dry contact has been connected
to the corresponding inlet.
• For MicroBrite and other LED lights with colours
that may change with impulses, on the Home
menu, selecting Lighting and validating the cho-
sen light programme type (color mode / mono or
party ...).
Junction box
Wire connectors