Smocking - Bernette Chicago 5 Instruction Manual

Smocking

Adjust the stitch length to 4mm and loosen the thread
•
tension.
Use the Zigzag foot to sew straight lines 1cm (3/8 inch)
•
apart from each other, across the area to be smoked.
• Knot the threads along one edge.
• Pull the bobbin thread and spread the pleats evenly.
Secure the threads at the other end.
• Reduce the tension, if necessary and sew decorative
pattern stitches between the straight seams.
Pull out the gathering stitches.
•
Basic Sewing Procedures
61