Download Print this page
injen technology SP2106 Quick Start Manual

injen technology SP2106 Quick Start Manual

Air intake system for 08-09 scion xb 2.4l 4 cyl.

Advertisement

Quick Links

Part number SP2106
08-09 Scion xB 2.4L 4 cyl.
1- 2 pc. cold air intake
MR Tech and Air Fusion
with
This system converts into a short ram
1- 3" Injen filter
1- 2 1/2" x 3" step hose (#3110)
1- 3" straight hose
3- Power Bands
.362/.048
1- Power Band
.312/.040
2- M4 x 10mm
button head
1- M5 x 12mm hex bolt (#6036)
2- m6 vibra-mount
2- m6 flange nuts
2- Fender washers
1- 6 page instruction
Note: All parts and accessories now
sold on-line at :
"injenonline.com"
Note: The installation of this cold air intake does require mechanical skills. Removal of the front bumper requires
loosening and removing several plastic plugs and screws that may be difficult. In addition to removing the
bumper, you will also have to remove the air resonator box, battery and tray when beginning this installation.
Injen strongly recommends that this system be installed by a professional mechanic.
MR
Technology, "The World's First Tuned air Intake System!"
Figure 1
Congratulations! You have just purchased the best engineered,
dyno-proven cold air intake system available.
equipped
Report any defective or missing parts to the Authorized Injen
Technology dealer you purchased this product from.
(#1014)
Before installing any parts of this system, please read the instructions
thoroughly. If you have any questions regarding installation please
contact the dealer you purchased this product from.
(#3044)
Installation DOES require some mechanical skills. A qualified
(#4004)
mechanic is always recommended.
(#4003)
*Do not attempt to install the intake system while the engine is hot.
(#6047)
The installation may require removal of radiator fluid line that may
be hot.
Injen Technology offers a limited lifetime warranty to the original
(#6020)
purchaser against defects in materials and workmanship. Warranty
(#6002)
claims must be handled through the dealer from which the item was
(#6010)
purchased.
Injen Technology 244 Pioneer Place Pomona, CA 91768 USA
Note: This intake system was Dyno-tested with an Injen filter and
Factory safe air/fuel ratio's for Optimum performance
Now equipped with
Another great invention by Injen Technology
"Why settle for cheap imitations when you can have the original"
Please check the contents of this box immediately.
Please check the contents of this box immediately.
Injen parts. The use of any other filter or part will void the
warranty and CARB exemption number.
Parts and accessories are available on line at "Injenonline.com"
"Air Fusion"
Figure 2
Patent #7,359,795
Patent pending

Advertisement

loading
Need help?

Need help?

Do you have a question about the SP2106 and is the answer not in the manual?

Questions and answers

Summary of Contents for injen technology SP2106

  • Page 1 The installation may require removal of radiator fluid line that may button head be hot. 1- M5 x 12mm hex bolt (#6036) Injen Technology offers a limited lifetime warranty to the original 2- m6 vibra-mount (#6020) purchaser against defects in materials and workmanship. Warranty...
  • Page 2 Use a 10mm socket to remove the m6 bolts from the Once the three bolts have been removed, continue to lower air box to the lower brace. air box cleaner. remove the lower air box cleaner from the engine compartment. Page 2 of Part# SP2106...
  • Page 3 .048 over the other end. Page 3 of Part# SP2106...
  • Page 4 (B). This will allow you to move the negative battery cable to be relocated on the air box bracket. cable away from the secondary intake. Page 4 of Part# SP2106...
  • Page 5 The end of the intake will press up against the filter stop. Tighten the filter clamp once the filter has been Page 5 of Part# SP2106 pressed up against the intake end.
  • Page 6 5. Check the filter for excessive dirt build up. Clean or replace the filter with an original Injen filter (can be bought on-line at “injenonline.com”). Congratulations! You have just completed the installation of the best intake system sold on the market. Enjoy the added power and performance of your new intake system. Page 6 of Part# SP2106...