Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ERNITEC ASTRAL
Summary of Contents for ERNITEC ASTRAL
- Page 1 ASTRAL 3" Mini Dome Installation Programming Manual 3040-00040...
- Page 2 ASTRAL 3" Mini Dome 3040-00040 Page 2...
- Page 3 ASTRAL 3" Mini Dome Dear Customer Thank you for purchasing the Ernitec ASTRAL 3" Mini Dome. Details of ASTRAL and other Ernitec products are available either from Ernitec, your nearest distributor, or the Ernitec Web page www.ernitec.com Yours faithfully, Ernitec A/S Your ASTRAL 3"...
-
Page 4: Table Of Contents
ASTRAL 3" Mini Dome Table of Contents 1. Overview 2. Features 3. Precautions Shipping/storage Installation Cleaning Excessive light sources 4. Installation Switch settings Protocol Baud Rate Address Installation Connection cable Video output RS485 Control Connections RS485 Termination LED D1 and D2 Ceiling mount 5. -
Page 5: Overview
ASTRAL 3" Mini Dome 1. Overview The ernitec 3” mini PTZ Dome camera is state of the art design with compact structure and easy installation, especially suitable for the middle or small surveillance market. The mini Dome can be controlled from the Ernitec keyboards, DVR and matrix range 2. -
Page 6: Installation
SW 2 5 6 7 8 D 1 D 2 Protocol (SW2) The ASTRAL Mini Dome should be set up to use the Ernitec PTZ protocol. Other protocols are planned, and may be implemented in future versions. Protocol Ernitec 3040-00040... -
Page 7: Baud Rate
ASTRAL 3" Mini Dome Baud Rate (SW2) The baud rate is set with SW2. 2400bps must be used with Ernitec control equipment. Baud Rate RS485 RS485 RS485 Address (SW1) When controlling several Domes, each Dome must be assigned a unique address. -
Page 8: Installation
ASTRAL 3" Mini Dome Installation When installing the dome, please make sure that it is as far away as possible from high voltage cables, and other sources of interference. 1: Camera 2: Clear Sphere 3: Inner housing 4: Outer housing... -
Page 9: Connections
ASTRAL 3" Mini Dome Connections SW 1 SW 2 5 6 7 8 D 1 D 2 The supplied connection cable plugs in to JP2. Pin-out of JP2: Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6... -
Page 10: Ceiling Mount
ASTRAL 3" Mini Dome Ceiling mount 4-M4 Screw Foam Block EPE Chip • Remove the 4 M4x10 screws and take out the pan/tilt module. Pan/tilt Module • Remove the protective foam block. • Install the pan/tilt module again and fit the 4 M4x10 screws securely. -
Page 11: Operation
ASTRAL 3" Mini Dome 5. Operation Only operations unique to the ASTRAL Mini Dome are described. For general operating instructions, please refer to the documentation of the control equipment used. Some features may not be supported by all types of control equipment. -
Page 12: Specifications
ASTRAL 3" Mini Dome 6. Specifications Power supply: 14VDC Power consumption: Approx. 1A Camera: 1/4" colour Synchronisation: Internal Scanning system: Interlaced Horizontal resolution: 380 TVL Minimum illumination: 0.5 lux (without sphere) Lens: 3.7 or 6mm White balance: Auto AGC: Auto... -
Page 13: Ernitec Offices
ASTRAL 3" Mini Dome 7. Ernitec Offices Ernitec A/S (Headquarters) Hørkær 24 DK-2730 Herlev Denmark Phone: +45 44 50 33 00 Fax: +45 44 50 33 33 ernitec@ernitec.dk www.ernitec.com Ernitec GmbH (German Branch Office) Stormarnring 28 D-22145 Stapelfeld Germany Phone: (040) 67 56 25 0 Fax: (040) 67 56 25 25 ernitec@aol.com...
Need help?
Do you have a question about the ASTRAL and is the answer not in the manual?
Questions and answers